55. In Ho Choi and Joonwon Kim
"A pneumatically driven inkjet printing system for highly viscous microdroplet formation"
Micro and Nano Systems Letters, Vol. 4, 4, 2016. 06. 09
(DOI: 10.1186/s40486-016-0030-x)

54. Youngjae Park, Hyungmo Kim, Joonwon Kim and Hyungdae Kim
"Measurement of liquid-vapor phase distribution on nano- and microstructured boiling surfaces"
International Journal of Multiphase Flow, Vol. 81, pp. 67-76, 2016. 05
(DOI: 10.1016/j.ijmultiphaseflow.2016.01.007)

53. Young Kwon Kim*, Jiwoo Hong*, Kwan Hyoung Kang, Sang Joon Lee** and Joonwon Kim**
(* equally contributed, **corresponding author)
"Capillary waves in a sharp-edged slit driven by vertical vibration"
Experimental Thermal and Fluid Science, Vol. 71, pp. 52-56, 2016.02
(DOI: 10.1016/j.expthermflusci.2015.10.011)

52. Sanghyun Lee, Hojin Kim, Dong-Joon Won, Jaehyung Lee and Joonwon Kim
"On-demand, parallel droplet merging method with non-contact droplet pairing in droplet-based microfluidics"
Microfluidics and Nanofluidics, Vol. 20, issue 1, pp. 1-9, 2016.01.05
(DOI: 10.1007/s10404-015-1676-z)

51. In Ho Choi*, Hojin Kim*, Sanghyun Lee, Seungbum Baek and Joonwon Kim (* equally contributed)
"Plug-in nanoliter pneumatic liquid dispenser with nozzle design flexibility"
Biomicrofluidics, Vol. 9, 064102, 2015.11.12

50. Dong-Joon Won, Seungbum Baek, Hojin Kim and Joonwon Kim
"Arrayed-type touch sensor using micro liquid metal droplets with large dynamic range and high sensitivity"
Sensors & Actuators A: Physical, Vol. 235, pp. 151-157, 2015.11.01

49. Dong-Joon Won, Joonwon Kim and Jinhyun Kim
"Design optimization of duct-type AUVs using CFD analysis"
Intelligent Service Robotics, Vol. 8, issue 4, pp. 233-245, 2015.07.10

48. Hojin Kim, Sanghyun Lee, Jaehyung Lee and Joonwon Kim
"Integration of microfluidic chip with a size-based cell bandpass filter for reliable isolation of single cells"
Lab on a Chip, Vol. 15, pp. 4128-4132, 2015.09.03

47. Seungbum Baek, Dong-Joon Won, Joong Gil Kim and Joonwon Kim
"Development and analysis of a capacitive touch sensor using a liquid metal droplet"
Journal of Micromechanics and Microengineering, Vol. 25, issue 9, pp. 095015, 2015.08.19

46. In Ho Choi, Young Kwon Kim, Sangmin Lee, Seung Hee Lee and Joonwon Kim
"A pneumatic drop-on-demand printing system with an extended printable liquid range"
Journal of Microelectromechanical Systems, Vol. 24, no. 4, 2015.08