Journal

Publications Journal
  • [2016]

    55. In Ho Choi, Joonwon Kim
    "A pneumatically driven inkjet printing system for highly viscous microdroplet formation"
    Micro and Nano Systems Letters, Vol. 4, 4, 2016. 06. 09, (DOI: 10.1186/s40486-016-0030-x)

  • [2016]

    54. Youngjae Park, Hyungmo Kim, Joonwon Kim, Hyungdae Kim
    "Measurement of liquid-vapor phase distribution on nano- and microstructured boiling surfaces"
    International Journal of Multiphase Flow, Vol. 81, pp. 67-76, 2016. 05, (DOI:10.1016/j.ijmultiphaseflow.2016.01.007)

  • [2016]

    53. Young Kwon Kim*, Jiwoo Hong*, Kwan Hyoung Kang, Sang Joon Lee** and Joonwon Kim** (* equally contributed, **corresponding author)
    "Capillary waves in a sharp-edged slit driven by vertical vibration"
    Experimental Thermal and Fluid Science, Vol. 71, pp. 52-56, 2016.02

  • [2016]

    52. Sanghyun Lee, Hojin Kim, Dong-Joon Won, Jaehyung Lee and Joonwon Kim
    "On-demand, parallel droplet merging method with non-contact droplet pairing in droplet-based microfluidics"
    Microfluidics and Nanofluidics, Vol. 20, issue 1, pp. 1-9, 2016.01.05, (DOI: 10.1007/s10404-015-1676-z)

  • [2015]

    51. In Ho Choi*, Hojin Kim*, Sanghyun Lee, Seungbum Baek and Joonwon Kim (* equally contributed)
    "Plug-in nanoliter pneumatic liquid dispenser with nozzle design flexibility"
    Biomicrofluidics, Vol. 9, 064102, 2015.11.12

  • [2015]

    50. Dong-Joon Won, Seungbum Baek, Hojin Kim and Joonwon Kim
    "Arrayed-type touch sensor using micro liquid metal droplets with large dynamic range and high sensitivity"
    Sensors & Actuators A: Physical, Vol. 235, pp. 151-157, 2015.11.01

  • [2015]

    49. Dong-Joon Won, Joonwon Kim and Jinhyun Kim
    "Design optimization of duct-type AUVs using CFD analysis"
    Intelligent Service Robotics, Vol. 8, issue 4, pp. 233-245, 2015.10

  • [2015]

    48. Hojin Kim, Sanghyun Lee, Jaehyung Lee and Joonwon Kim
    "Integration of microfluidic chip with a size-based cell bandpass filter for reliable isolation of single cells"
    Lab on a Chip, Vol. 15, pp. 4128-4132, 2015.09.03

  • [2015]

    47. Seungbum Baek, Dong-Joon Won, Joong Gil Kim and Joonwon Kim
    "Development and analysis of a capacitive touch sensor using a liquid metal droplet"
    Journal of Micromechanics and Microengineering, Vol. 25, issue 9, pp. 095015, 2015.08.19

  • [2015]

    46. In Ho Choi, Young Kwon Kim, Sangmin Lee, Seung Hee Lee and Joonwon Kim
    "A pneumatic drop-on-demand printing system with an extended printable liquid range"
    Journal of Microelectromechanical Systems, Vol. 24, no. 4, 2015.08

1 2 3 4 5 6 7