Conference

Publications Conference
  • [2014]

    42. Aeree Kim, Chan Lee and Joonwon Kim
    "Design of robust superhydrophobic stainless steel for anti-icing and effective defrosting",
    FLOW14 conference, University of Twente - The Netherlands 2014.05.18~05.21

  • [2014]

    41. Chan Lee, Hyungmo Kim and Joonwon Kim
    "Wettability Control of Stainless Steel Mesh by Electrochemical Etching",
    International Symposium on Nature-inspired Technology 2014 (ISNIT 2014), Hokkaido Universitry(Japan)      2014.02.12~02.15

  • [2014]

    40. Sanghyun Lee, Hojin Kim and Joonwon Kim
    "MICROFLUIDIC-BASED DROPLET MERGING DEVICE WITH A NON-CONTACT DROPLET PAIRING METHOD",
    IEEE MEMS 2014, San Francisco 2014.01.26~01.30

  • [2013]

    39. Aeree Kim, Hyungmo Kim and Joonwon Kim
    "EFFECTIVE THREE-DIMENSIONAL SUPERHYDROPHOBIC CHANNEL COATING USING ORGANICALLY MODIFIED SILICA AEROGEL",
    IEEE MEMS 2013, Taipei(Taiwan) 2013.01.20~01.24

  • [2013]

    38. Chan Lee and Joonwon Kim
    "Functional Surface Modification of Stainless Steel Using Anodization Method",
    International Symposium on Nature-inspired Technology 2013 (ISNIT 2013), Gangwon(Korea) 2013.01.06~01.09

  • [2012]

    37. Hyungmo Kim, Chan Lee, Moo Hwan Kim and Joonwon Kim
    "Spreading and Fragmenting Characteristics of Impacting Droplet on Micro/Nano structured Water-Repellent Surfaces",
    The 65th Annual Meeting of the American Physical Society Division of Fluid Dynamics 2012, San Diego, 2012. 11. 18~20

  • []

  • [2012]

    36. Hojin Kim and Joonwon Kim
    "A SIMPLE YET EFFECTIVE MICROFLUIDIC SYSTEM FOR TRAPPING AND RELEASING SINGLE MICROBEADS",
    MicroTAS 2012, Okinawa, 2012.10.29~11.01

  • [2012]

    35. Usung Park, Seungbum Baek, Jong Up Jeon, Jin Woo Song and Joonwon Kim
    "A high precision MEMS resonant accelerometer based on robust structural design",
    APCOT 2012, China, 2012.7.8~11

  • [2011]

    34. Ikjoo Byun, Jongho Park, Joonwon Kim and Beomjoon Kim
    "Fabrication of PDMS Nano Stamp by Replicating Si Nano Mold Fabricated by Interference Lithography",
    The 4th International Conference of Asian Society for Precision Engineering and Nanotechnology,Hong Kong, Nov. 16~18. 2011

1 2 3 4 5 6